The tool thus will pull the mandrel within the rivet. Push the smaller end of the rivet through the hole and press the tool hard against the pieces so that the larger head of the rivet is pressed tightly against the metal. Use a vise to hold the pieces together and don't move them while you drill a hole. Overlap the pieces and drill a 1/8' hole through both of them. Most rivets in your home will be about the same size so it's very unlikely you will need to make larger holes. Take an electric drill and a sharp metal bit that drills the holes of 1/8' in size. Q: What is the procedure for riveting? A: Prepare the pieces you need to connect together. Riveting isn't always a quick process and if you don't want to fatigue your hand, it's better to opt for the ergonomic tool. Also, take a look at the convenience features such as handles, the weight of the tool, etc. In order to estimate overall durability of the tool, check out the design of the gun and what material it's been produced from. Smaller rivets work better with pliable materials.įeatures Finally, it is important to consider the extra features. Thus, large rivets ensure a stronger connection and therefore, should be used for fastening dense and hard materials. Depending on the material that you work with, you may select the rivets of different sizes. Rivet Size When selecting a riveter, you should also consider its compatibility with the rivets you will need for your projects. Manual rivet guns won't let you work as fast as you could have done using either of the two mentioned above, however, they can offer you complete independence from batteries and air compressors, as well as greater mobility due to their small size and light weight.

In this sense, pneumatic guns can offer you nonstop performance and therefore, suit large projects better. With a battery-powered gun, the operator isn't going to be bound to the socket but eventually, will need to break away from work to charge it. The advantage of pneumatic and battery-operated guns is that they are usually very powerful and operate considerably faster than the manual tools. Riveting guns are commonly classified according to their operating principle and fall into the following three groups: battery-powered, manual, and pneumatic. Type To pick the right riveting tool for your specific project, you should get acquainted with its tech characteristics. Continue reading our five best rivet guns reviews and select the most appropriate tool for your projects. In order to make a connection spot, you will need to drill some holes through the parts, then attach a rivet to the gun nosepiece, insert the rivet into the hole and push the trigger. Another obvious advantage of the rivet guns is that they operate quickly, are very easy-to-use, and ensure secure fastening. Riveting is often used for clamping metalware and other materials like rubber, plastic, cardboard, and some other combinations.

It comes helpful in many different situations where the use of a MIG welder is impossible. So, what is a rivet gun and what are the advantages of using this tool? A rivet gun is a tool which is used for driving rivets into the metal surfaces. For fastening pieces of wood, you could use a staple gun, while if you needed to pin some metal parts, you'd need to use a rivet gun. On construction sites, it is often the case that some of the parts need to be pinned or fastened together.

Hand pneumatic rivet nut gun